Reddy Heater 200,000 BTU Kerosene Forced-Air Heater #R200BT - User Documentation New Guides

Reddy Heater 200,000 BTU Kerosene Forced-Air Heater #R200BT Owners Manuals, User Guides, Instructional Help Documents & Information.

Featured Questions

Preliminary list of posts to be most interested community
The heater lights and burns fine then gradually gets cooler and quits
Answer
Greetings, have a heater with new lines, filters, nozzle, fuel, pressure set, new ignitor...Problem... have poor start up, most times will not fire. will get better average of start up when cover is off. I can see element heat up and fuel delivery but no fire . Seems fuel spray not making good contact with element... Help, thanks, Eric A
Answer
Heater wont fire unless i remove the top cover on the 200 k model.sometimes shuts off within minutes sometimes lasts an hour .the ignitor light is on very dimly as is the flame light.VERY dimly.i cleaned the photocell but still acts up.the ignitor turns on and glows red hot and the injector sprays well but will not fire at times
Answer

Latest Questions

Latest posts in community
Heater wont fire unless i remove the top cover on the 200 k model.sometimes shuts off within minutes sometimes lasts an hour .the ignitor light is on very dimly as is the flame light.VERY dimly.i cleaned the photocell but still acts up.the ignitor turns on and glows red hot and the injector sprays well but will not fire at times
Answer
Greetings, have a heater with new lines, filters, nozzle, fuel, pressure set, new ignitor...Problem... have poor start up, most times will not fire. will get better average of start up when cover is off. I can see element heat up and fuel delivery but no fire . Seems fuel spray not making good contact with element... Help, thanks, Eric A
Answer
The heater lights and burns fine then gradually gets cooler and quits
Answer

Helpful Links

Helpful Social

Copyright © 2024 QA.XPDF.PUB - All rights reserved.