U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum - User's Manuals

U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum Owners Manuals, User Guides, Instructional Help Documents & Information.

Featured Questions

Preliminary list of posts to be most interested community
Belt is hot to touch
Answer
Belt is too loose
Answer
Hoover has no power. Is there a reset button?
Answer
Can't lower handle on Hoover wind tunnel vac U6432-900
Answer
Beater brush will not operate
Answer
Belt tension adjustment
Answer
Belt is torn
Answer
Does the hoover turbo power wind tunnel have a dirt finder
Answer
Brush won't turn
Answer
WindTunnel HEPA Filter won't spin
Answer
Caught rug, motor overheated, the brush wont turn at all, but suction is still there ...is there something I can do to reset it?
Answer
We have already spent $60 on getting the belt repaired once. This time, the same thing is happening, the belt is jumping of the small metal bar in the back of the housing. Seems like there should be something on the end of the bar to keep the belt on it?
Answer

Latest Questions

Latest posts in community
We have already spent $60 on getting the belt repaired once. This time, the same thing is happening, the belt is jumping of the small metal bar in the back of the housing. Seems like there should be something on the end of the bar to keep the belt on it?
Answer
We have a Hoover windtunnel. Replaced both belts and cable. Doesn't self propel forward as good as it did. Easier when you pull back. Any ideas?
Answer
WindTunnel HEPA Filter won't spin
Answer
Belt is hot to touch
Answer
Keeps shutting off after a few minutes of use.have changed bagsno clogs and filters have even been washed.what is auto shutoff device and where?
Answer
Does the hoover turbo power wind tunnel have a dirt finder
Answer
U6439-900 Windtunnel Bagged Upright Vacuum
Answer
Removing the cover from U6445-900
Answer
Houver Cleaner My self propelled windtunell baged Vacumn has a broken belt. The small visible one that is visible is intact. This is the thick belt. I cannot for the life of me figure out what to open and how to replace it. The model # is U6 401-9RM I keep asking for a manual online but it doesn't recognize this number. I am 67 yrs old broke and fix it challenged..lol can you help me?
Answer
Flat belt to hard to stretch
Answer
Caught rug, motor overheated, the brush wont turn at all, but suction is still there ...is there something I can do to reset it?
Answer
U6439-900 Windtunnel Bagged Upright Vacuum
Answer
The roller brush underneath is not spinning when the vaccum is on, it does spin freely, I'm thinking maybe there's a belt inside that may have come off?! Is it easy to fix or replace this?!
Answer
THE ROLLER WON'T GO AROUND. THE EXTRA ATTACHMENT WORK WELL, BUT THE ROLLER STOPPED GOING AROUND
Answer
How do I replace 38528-027 belt on hoover preferred ?
Answer
Where does the piece go to rise and lower the brush
Answer
Belt is torn
Answer
Hoover has no power. Is there a reset button?
Answer
The windtunnel vacuum has suction but does not pick up the dirt. I'm puzzled as to what might be the problem. Help!
Answer
U6439-900 Windtunnel Bagged Upright Vacuum
Answer
How do you change the power cord on the Hoover u5475-900 Wind Tunnel 6200? Thanks for your help
Answer
Won't turn on
Answer
How many belts does it have and were do they go
Answer
No suction or very little
Answer

Helpful Links

Helpful Social

Copyright © 2024 QA.XPDF.PUB - All rights reserved.