1hp 1725RPM 56C Frame 90 Volt Dc Electric Motor with 115... - Tips for writing user manuals

1hp 1725RPM 56C Frame 90 Volt Dc Electric Motor with 115... Owners Manuals, User Guides, Instructional Help Documents & Information.

Featured Questions

Preliminary list of posts to be most interested community
2 hp daton 3 phase motor runs hot - Dayton 1hp 1725RPM 56C Frame 90 Volt Dc Electric Motor with 115 Volt Input Control # 1F798
Answer
Hi, I have a question about a 220v motor on a boat lift. The motor will operate fine in the down operation and will work fine when the boat is in the water starting up with no load. However, if you were to stop the lift, say half way up, and start up again, the motor will not start and by that I mean it will turn very slow and after about 10 seconds will trip the fuse. After that, I have to lower the boat down again and start with no load and it will be fine unless I stop again. The motor is approx. 15 years old in salt water environment. I have replaced the capacitor and checked all the connections and appear to be ok. I'm just wondering if the motor windings could just be old and need to replace the motor. Any help would be greatly appreciated. Thanks David
Answer
I have dayton 6k757a 5 hp 230 volt motor for my air compressor and starts slow and blows the fuse
Answer

Latest Questions

Latest posts in community
Hi, I have a question about a 220v motor on a boat lift. The motor will operate fine in the down operation and will work fine when the boat is in the water starting up with no load. However, if you were to stop the lift, say half way up, and start up again, the motor will not start and by that I mean it will turn very slow and after about 10 seconds will trip the fuse. After that, I have to lower the boat down again and start with no load and it will be fine unless I stop again. The motor is approx. 15 years old in salt water environment. I have replaced the capacitor and checked all the connections and appear to be ok. I'm just wondering if the motor windings could just be old and need to replace the motor. Any help would be greatly appreciated. Thanks David
Answer
I have dayton 6k757a 5 hp 230 volt motor for my air compressor and starts slow and blows the fuse
Answer
2 hp daton 3 phase motor runs hot - Dayton 1hp 1725RPM 56C Frame 90 Volt Dc Electric Motor with 115 Volt Input Control # 1F798
Answer

Helpful Links

Helpful Social

Copyright © 2024 QA.XPDF.PUB - All rights reserved.